|
|
home |
 |
download PDF |
Motor Technology - EcoController GEL 8100 |
 |
request details | for positioning, synchronising, CAM, winding, flying-saw, |
 |
view printer friendly page | rotating knife and LB-Flex (freely programmable) |
The
challenge set by today's industry for lower cost, flexible and user friendly
control equipment has been at the heart of the new
EcoController
development.
The EcoController addresses these requirements by offering Task / Application related solutions.
The range of controllers is as follows:
 |
GEL8110 Positioning Controller |
|
GEL8130 Flying Saw Controller |
|
GEL8135 Rotating Knife / Cutter Controller |
|
GEL8140 Synchronisation Controller |
|
GEL8150 Winding / Coiling Controller |
|
GEL8180 CAM Controller |
|
GEL8190 LB-Flex Controller (freely programmable) |
The following list of features is a small extract from the overall capabilities.
Construction (standard):
|
compact module for DIN rail / back panel mounting |
|
24 I/O, 2 x RS485 and 1 off RS422/485 |
|
pre-configured software for simplified positioning, synchronising and Cam functions |
|
ready for networking up to 31 controllers |
|
compatible with Operator Panel
|
System Capabilities
|
1 or 2 axis analogue outputs (+/-10V, 14bit) per EcoController |
|
up to 136 digital I/O per controller |
|
suitable for 5V/24V incremental and absolute SSI encoders |
|
Profibus and CAN-Bus |
|
CE compliant |
Software
|
Positioning, 1 or 2 axis, 99 programmes with up to 999 blocks, conditional branching, optimised path, park position, independent ramps, area signals |
|
Synchronising (master/slave), with or without control of the master. Synchronisation between multiple Controllers |
|
Cam control, 64 tracks with 3584 freely assignable cams in up to 99 programmes |
|
LB-Flex, freely programmable PLC language for generating customer specific programs and features: |
Documentation (in PDF format)
| |
| |
| |
| |
| |
| |
| |
|
GEL
8810