home

 

download PDF

 Motor Technology - Metronix / Trio MC 2000
request details plug-in 4 axis motion control card for ARS 2000 servo drives
view printer friendly page  

 

 

 

Overview...

 

The MC 2000 motion control module for the ARS 2000 servo drive range enables coordinated motion for up to 4 servo axes.

Complex motion control requirements can be realised quickly and efficiently, such as:

bullet

Electronic CAM and Gearing

bullet

Synchronised Axes

bullet

Point-to-point Positioning

bullet

Interpolated Axes

 

The MC 2000 is simply plugged-in to the ARS 2000 drive. The controller then acts as the Master over the CANopen DS 402 field-bus controlling one, two, three of four servo drives.

Additionally an external encoder can be attached directly to the drive to give a further ½ axis of control.

The extensive I/O facilities of the ARS 2000 drive can be utilised in the controller. Furthermore the system can be extended using the plug-in I/O module EA88 or CAN I/O.

Fast

bullet

1ms cycle time with up to 4 axes

bullet

Short commissioning times using the Trio ‘Motion Basic’ programming language, with extensive command set

bullet

High-speed sampling input for fast actual value capture and evaluation.

Compact

bullet

Controller plugs directly into the drive

bullet

Coordination of up to 4 servo axes

bullet

Easy cabling via CANbus

 Easy

bullet

Simplified application programming with the established Trio Motion software ‘Motion Perfect’

bullet

Easy generation of complex motions such as CAM, gearing or multi-axis interpolation

bullet

Clear cabling through the use of drive-internal interfaces and fast Dual Port RAM

 System integration

HMIs can be connected to the controller via the RS485 interface. I addition the integrated RS232 port provides the link to the Trio ‘Motion Perfect’ multi-tasking software development environment.