home

 

	download PDF	Motor Technology - DBL/K series
	request details	brushless servo motors up to 115Nm
	view printer friendly page

The synchronous servomotors of the series DBL/DBK are brushless three-phase motors for high quality servo-applications. The servomotors have Neodymium permanent magnets in the rotor. Because of the standardised flange and shaft measurements the motors can be easily combined with gearboxes and other equipment.
 

Feedback
The motors are equipped with two-pole hollow-shaft resolvers. As an alternative these motors are available with high resolution encoders. Retrofitting is not possible. The length of the motor depends on the feedback type.

Holding Brake
The motor can be delivered with or without a built-in holding brake. Retrofitting is not possible. The motor length will increase with an installed brake.
 

Safety
Coil temperature is supervised by temperature sensors and reported by potential free contacts.
 

Short motors
The motors of the series DBK are very suitable for room-restricted installation areas.
 

Compatibility
The DBL motors are compatible with the proven 6SMx7 motor series.

Features

• neodymium magnets for highly dynamic function

• flange dimensions to IEC standard, fit j6, accuracy according to DIN 42955, tolerance class R

• vibration class N according to DIN ISO 2373

• insulation for 480V rated mains voltage (DBL1 : 230V)

• insulation material class F according to DIN 57530

• basic style IM B5 according to DIN 42950

• shaft end without a fitted-keyway

• Protection class IP 64

• Long life by virtue of brushless design

• Built-in Resolver

• DBL2...DBL8 and DBK are UL recognized

Options

• holding break

• shaft with keyway

• radial shaft-sealing ring

• vertical mounting sockets for resolver and power connections

• built-in high resolution EnDat encoder

• second thermal protection contact

• forced ventilation

Dimensions

(click here for DXF files)

Technical data