Line Shafts ZA

Please select a Product:

MODEL SERIES ZA	ZA 10-800 Nm	ZA 1500-4000 Nm	ZAE 10-800 Nm	EZ 2 / 12,5-2150 Nm
	General \| technical information \| 2D and 3D download

Line Shaft Model ZAE
with split hub from 10 – 800 Nm

	Coupling laterally removable
	Convenient mounting and dismounting with split hubs
	Standard lengths up to 6 m (19.68 ft.)
	No pillow block bearing required

Design:
Balanced split clamping hubs with two radial
clamping screws ISO 4762
Intermediate tube section supported by gimbals within the bellows.

Temperature range:
-30 to +120° C (3.6 F to 270)

Backlash:
Absolutely backlash-free.

Service life:
R+W Line Shafts are maintenance-free and have a infinite life, if the tolerances are not exceeded.

Fit tolerance:
On the hub/shaft connection 0.01 to 0.05 mm.

Material:
Bellows made of flexible stainless
steel Aluminum intermediate tube section through
size 150, size 300 and up have a steel tube.
Optional composite CFK tube for high speeds.
Clamping hubs through size 60 Aluminum, size
150 and up have steel hubs.

Non-standard application:
Custom designs with varied tolerances, keyways,
non-standard material and bellows are available upon request.

Technical Data:

	rated torque from 10 - 800 Nm
	shaft diameter from 5 - 72 mm

Properties of Line Shafts Model ZAE:

	Compensation for misalignments
	Backlash-free and torsionally rigid
	Spans longer distances
	Split hubs for convenient mounting and dismounting

This Line Shafts is available as ATEX version
for applications in explosive atmosphere.

Possible applications for Line Shafts ZAE:

Line shafts

Line Shafts ZA

Line Shaft Model ZAE with split hub from 10 – 800 Nm

Line Shaft Model ZAE
with split hub from 10 – 800 Nm