|
|
motec.co.uk |
| Motor Technology - Motor Flange Table | ||
 |
request details | quick reference of typical motor sizes |
 |
view printer friendly page |
At Motor Technology we strive to supply standard product for any application you may have. Compatibility of differing motors becomes a major issue when you are looking for a replacement. To assist you in defining the motor size required, please utilise the table below. This is by no means a definitive list, but represents some of the typical sizes we encounter on a daily basis:
| Motor Size | A | D | L | HC 2 | d |
| IEC 63 B14 | 60 | 11 | 23 | 75 | M5 |
| IEC 71 B14 | 70 | 14 | 30 | 85 | M6 |
| IEC 80 B14 | 80 | 19 | 40 | 100 | M6 |
| IEC 90 B14 | 95 | 24 | 50 | 115 | M8 |
| IEC 100 B14 | 110 | 28 | 60 | 130 | M8 |
| IEC 112 B14 | 110 | 28 | 60 | 130 | M8 |
| Servo 80 1 | 80 | 14 | 30 | 100 | ø7 |
| Servo 95 1 | 95 | 19 | 40 | 115 | ø9 |
| Servo A200 | 130 | 24 | 50 | 165 | ø11 |
1 according to DIN 42950
2 Hole Centre distance, also refered to as PCD or Pitch Circle Diameter
Please keep checking back as this page will be updated on a regular basis. If you feel we've missed something, please contact the webmaster.
Source: Various, including Danaher Motion, Girard, Tramec, Zebotronics and other sales literature.