Know Your Duty Cycles

The International Electrotechnical Commission (IEC) has eight classifications for duty cycles to designate a motor’s operating conditions. It’s extremely important to know the differences and to note what mode of operation each rating refers to. When specifying a motor it’s worth talking to a supplier that can give advice on such matters to ensure you […]

Fuji Techno – HYM, Super Metering Pumps

The HYM series super metering pumps (SMP) offer a solution for accurate pumping and dosing applications for laboratory trials, small batch production and specialist requirements. The HYM series SMPs provide flow rates following flow rates dependent on the plunger size: •HYM-03, plunger diameter 3mm, maximum flow rate 15.3ml/min •HYM-06, plunger diameter 6mm, maximum flow rate […]

Fuji Techno – HYS-B, C and D, Super Metering Pumps

Fuji Techno – HYS-B, C and D, Super Metering Pumps Super Metering Pumps are precision instruments for feeding liquids accurately, at pre-determined volume, into a process or system. The accuracy is essential for applications such as micro-reactors and continuous flow reactors. The HYS-B series super metering pumps (SMP) offer a solution for accurate pumping and […]

Fuji Techno – HYS-A, Super Metering Pumps

Fuji Techno – HYS-A, Super Metering Pumps The HYS-A series super metering pumps (SMP) offer a solution for accurate pumping and dosing applications for small scale production. The HYS-A series SMPs provide flow rates from around100ml/min up to 2.3l/min at discharge pressures up to 980Bar. There are various metalic liquid head types available for different […]

Festo – EGC-TB linear tooth-belt driven actuator

Efficiency, maximum dynamic response and speed with further improved rigidity – as a toothed belt or ball screw driven linear actuator Features New aluminum profiles with exterior guide: increased rigidity and improved efficiency thanks to downsizing (smaller size with the same load) Guide closer to the load: smaller lever arm for large maximum load and […]

Festo – linear tooth-belt driven actuator ELGR

The ELGR linear actuator is an ideal choice for cost sensitive applications requiring a simple yet reliable means of movement. The innovative construction also provides easy and flexible means of installation. Features Three sizes 35, 45 and 55 Ideal price/performance ratio Ready-to-install unit for quick and easy configuration Excellent reliability thanks to tested service life […]

Festo – EGC-BS, linear ball-screw driven actuator

Efficiency, maximum dynamic response and speed with further improved rigidity… Features New aluminum profiles with exterior guide: increased rigidity and improved efficiency thanks to downsizing (smaller size with the same load) Guide closer to the load: smaller lever arm for large maximum load and torques Motor connection on both sides (right/left) and both ends of […]

Metronix – ARS 2000 FS series module

The servo drive product family ARS 2000-FS follows the Metronix ethos of providing “universal” servo drive products that can be quickly adapted to the needs of the customer. The new “functional safety” version combines the main features of the original ARS 2000 drive series with some new benefits. Features CANopen interface, DSP 402 Integrated EMC […]

Metronix – ARS 2108 series

Metronix – ARS 2108 series The new ARS 2108 servo positioning controller extends the ARS 2100 product range to 1.5kW continuous. With a peak output of up to 6kW (0.5s) these servodrives are ideal for use with linear motors and other high dynamic applications requiring maximum acceleration and deceleration capabilities. The improved current, speed and […]

Metronix – ARS 2300 series

Metronix – ARS 2300 series The ARS 2000 servo positioning controllers (ARS servo 2nd generation) are intelligent AC servo inverters for operation direct from a three-phase mains supply. They are flexible and can be easily adapted to a number of different applications, with many adjustment and expansion options. In addition to speed and torque control, […]

Metronix – MC 2000

Metronix – MC 2000 Plug-in Module for ARS 2000 A new plug-in module from Metronix is capable of controlling up to four coordinated servo axis from the ARS 2000 servo drive. The MC 2000 module, available in the UK from Motor Technology, is simply inserted into an ARS 2000 servo drive where it acts as […]

Metronix – ARS 2100 series

The ARS 2100 servo positioning controllers (ARS servo 2nd generation) are intelligent AC servo inverters for operation direct from a single-phase mains supply. They are flexible and can be easily adapted to a number of different applications, with many adjustment and expansion options. Due to the integrated Power Factor Correction the device already fulfils the […]

Metronix – Profinet Tecnnology Module

Metronix – ProfiNET technology module for the ARS 2002-FS series servo positioning drives Metronix ARS 2000-FS servo positioning drives can now be fitted with the ProfiNET technology module for quick and easy integration into a ProfiNET IO network. Features The control of the drive is carried out using function and data-blocks, which will already be familiar […]

Metronix – ARS 2000 FS series, servo positioning drives

The servo drive product family ARS 2000-FS follows the Metronix ethos of providing “universal” servo drive products that can be quickly adapted to the needs of the customer. The new “functional safety” version combines the main features of the original ARS 2000 drive series with some new benefits: The drive peak current has been increased […]

Metronix – DIS 2-48/10 decentralised servo drive

Metronix DIS 2-48/10 decentralised servo drive The DIS-2 48/10 is a fully digital AC servo controller for three-phase synchronous and PM DC motors with a supply voltage of 24..48 V DC. The DIS-2 is optimally suitable for the decentralized employment. It can be mounted directly to the terminal block of the motor or used as […]

Know your Duty Cycles

Know your Duty Cycles  The International Electrotechnical Commission (IEC) has eight classifications for duty cycles to designate a motor’s operating conditions. It’s extremely important to know the differences and to note what mode of operation each rating refers to. Establishing the duty cycle of a motor and drive for a given application will help you to save […]

Whatever you want

Whatever you want Our philosophy has always been about supplying customers with exactly what they need, and not what we want to sell, as can be the case with some suppliers. This means we’re called on to help with really diverse projects from designing the most high-tech automation systems to trying to find replacements for […]

New test and programming unit for sensors has WIFI web interface

New test and programming unit for sensors has WIFI web interface Lenord + Bauer has launched a new test and programming unit, the GEL 211 for its GEL 2444x series sensors with sin/cos output 1 Vp/p and reference signal. It is used for easily checking the signals for compliance with adjustable tolerance limits. This includes […]