Wireless Operator Panels Reduce Downtime
A new range of wireless operator panels from KEBA Automation AG, aid production efficiency and reduce downtime by keeping relevant staff informed of machine issues. The service engineer, machine operator and supervisor are always kept up to date with the latest information by the mobile terminal that has been personally assigned to them. Regardless of […]
Engineering sector contributes £645bn to the UK’s economy
The Royal Academy of Engineering released the research on National Engineering Day (2 November), which aims to celebrate UK engineering and highlight the importance of the profession and its impact on people’s lives. Research conducted by Metro Dynamics for a project commissioned by the Royal Academy of Engineering reveals: • Hotspots of engineering appear all […]
The New MC403-X is now in stock and available to order!
Each of the flexible axis ports can be configured in software as either input or output. As an output it can be used as ‘pulse and direction’ to control steppers or servo drives, or operate as a simulated encoder output. When configured as an input the axis port supports a variety of feedback devices including […]
R+W’s solution for high speed applications
Motor Technology have been proud suppliers or R+W products and are excited to learn about the newest range of couplings. Read their latest press relaese below. At high rotational speeds special considerations must be made for the design and manufacturing quality of a coupling, as any inaccuracies in machining and balancing become magnified as velocity […]
Our recent pump control unit build
Motor Technology Ltd. were recently asked by a customer to assist in completing the build of a pump control unit. The project had been shelved after the colleague in charge left the company, so it was up to us to finish the job! The unit comprised of two gear-pumps with brushless servo motors with integrated […]
Manufacturing and Engineering Week 2023
Join us at stand R46 at the Manufacturing & Engineering Week. Wednesday 7 June 2023 – 09:30 – 17:00 & Thursday 8 June 2023 – 09:30 – 16:00 Manufacturing and Engineering week brings the entire community together for a festival of innovation featuring a dynamic, interactive series of digital and live events to inspire, inform […]
VarioCODER Lenord + Bauer’s new rotor position sensor
Efficiency, noise and service life of electric traction motors depend considerably on the signal quality of the sensors used. Our innovative VarioCODER rotor position sensor provides high-precision positions and speeds for ripple-free drive speed and torque control. The bearing-free, maintenance-free hollow shaft system can be integrated into all motor designs with minimum space requirements. The […]
NEW firmware update for TRIO’s Motion Coordinators
Trio have released a new firmware update, version 2.0304 for all Motion Coordinators in the MC4, 5 and 6 ranges apart from the MC464. What can we expect with the new Firmware 2.0304 update? There has been an optimization of the Uniplay HMI, including new HMI disconnect alerts and a reduction in CPU usage […]
Surging demand highlights bottlenecks
As you have probably heard in the trade press our industry is experiencing pressure on resources and manpower and, as a result, suppliers are advising of increases to prices and delivery times. Here are a couple of links to recent news items: “As the world starts to emerge from the Covid-19 pandemic, manufacturers around the […]
UK manufacturing PMI almost broke all-time record in April
The UK manufacturing PMI (Purchasing Managers’ Index) came close to setting an all-time record in April when it hit 60.9 – its highest level since July 1994, when it hit a peak of 61. The monthly survey, compiled by IHS Markit and CIPS, reveals that the growth of output and new orders were among the […]
NEW firmware update for TRIO’s Motion Coordinators
Trio have released a new firmware update, version 2.0304 for all Motion Coordinators in the MC4, 5 and 6 ranges apart from the MC464. What can we expect with the new Firmware 2.0304 update? There has been an optimization of the Uniplay HMI, including new HMI disconnect alerts and a reduction in CPU usage […]
NEW… Motion Perfect v5 from TRIO
‘Design, Develop, Test, Deploy and Secure’ Motion Perfect v5 enhances the programming experience for your Motion Coordinator and the upcoming DX4 range of servo drives. New and Improved… • DX4 Servo Drive Support • New Flatter User Interface • Improved Support for Third Party EtherCAT Devices • Enhanced Motion-iX Editor • Updated IEC Editor Component […]
Know Your Duty Cycles
The International Electrotechnical Commission (IEC) has eight classifications for duty cycles to designate a motor’s operating conditions. It’s extremely important to know the differences and to note what mode of operation each rating refers to. When specifying a motor, it’s worth talking to a supplier that can give advice on such matters to ensure you […]
Do this before you send a servo motor to a repairer
If you’re sending a servo motor to a repairer you don’t know, it’s worth taking this one very simple precaution before you do. In fact, even if you know and trust the repairer, it’s still worth doing this just to be on the safe side. If you don’t and the repairer overlooks it then you […]
‘Did You Miss This’ Survey
Whatever you want
Our philosophy has always been about supplying customers with exactly what they need, and not what we want to sell, as can be the case with some suppliers. This means we’re called on to help with really diverse projects from designing the most high-tech automation systems to trying to find replacements for components that are […]
New test and programming unit for sensors has WIFI web interface
Lenord+Bauer has launched a new test and programming unit. The GEL 211 for its GEL 2444x series sensors with sin/cos output 1 Vp/p and reference signal. It is used for easily checking the signals for compliance with adjustable tolerance limits. This includes sin/cos signals (amplitude, offset and phase offset), reference signal (amplitude, offset, position and […]
Have you seen our article on the MACK Tron servo motor in the latest issue of Industrial Technology magazine?
A new range of ultra-compact servo motors with integrated drives has been launched by Motor Technology. The new Mack-Tron motors, manufactured by Axor Industries, have been designed to satisfy the demands for quick and simple cabling with an excellent performance to size ratio. Ideally suited for decentralised applications, the ultra-compact format allows for installation where […]
New Motion Coordinators run remote servo
Trio has launched a new concept in high performance Motion Coordinators dedicated to running remote servo and stepper drives via the EtherCAT real time automation bus. Based on an up-dated version of the 532MHz ARM 11 processor the new MC4N Mini EtherCAT Master is ideal for high axis count machines or robotic applications. The MC4N […]
Axor’s Mack Drive reduces costs with compact, centralised control
The innovative new MACK drive system, from Axor Industries, reduces cost by sharing the incoming supply across multiple axes, removing the need for filtering, power conversion and regeneration circuitry on individual drives, and reduced processor costs due to centralised control. The MACK system is based on a linked, modular design, with no fixed mechanical connection between the modules. All […]
