The MiniCODER GEL 244xM is an incremental rotary encoder with reference signal. It transmits data via a digital serial interface (Mitsubishi High Speed Serial Interface), decodes requests (RQ+/RQ-) received from a control system and then sends back the data requested (Data+/Data-).
The MiniCODER can be tested and configured using the testing and programming unit GEL 211CST4␣2M-.
The following functions can be configured in the parameters:
- MiniCODER function test
- Target wheel function test
- Changing the resolution
| Technical data | GEL 2444 | GEL 2449 |
|---|---|---|
| General information | See product page GEL 2444 | See product page GEL 2449 |
| Module | 0.3 and 0.5 | 0.4 and 1.0 |
| Reference mark | Lug (N), tooth (Z) | Tooth (Z) |
| Current consumption without load | ≤ 80 mA | |
| Data transmission rate | 2.5 Mbit/s | |
| Power consumption without load | ≤ 0.5 W | |
| Switch-on time | < 0.5 s | |
| Operating temperature range | 0 °C … + 70 °C | |
| Operating and storage temperature range | -30 °C … +105 °C | |
